| Function | Connector | DT Pin | Connected To | Function | Note |
|---|---|---|---|---|---|
| ? | ? | ? | EB1 14, ECU TAM | Sensor ground for A/C Ambient Temp | not needed |
| EB1 1 | Power for A/T indicator light switch. Switched Power. Depending on the gear selection it then continues to P, R, N or D at ECU. | 7,5A FR IG Fuse after IG1 Relay Probably we need to wire this to a positive source and at the gear box cable select a fixed gear? Alternative: PDM supplies power automatocally to ECU E7/D gear inputs und NSW | |||
| EB1 8 | Starter signal to Starter motor. This should be the thick cable on my EB2. This is not on my EB1 as stated in diagram | Not present on my loom! From starter solenoid main fuse when starting (30A AM2) -> Typo in Manual. This really is on EB2! IGNORE | |||
TODO: finish after the gearing chapter, maybe EB1 will not even be needed then